Snakebit: Levi “Whitesnake” Krech’s Tron SRT

This article originally appeared in Diesel Army.  


We all have dreams and naturally, everyone’s is different. We all either want to build something up to be extremely clean or really fast. In this case, we found both. Imagine a truck that is so clean that you wouldn’t lean on it, or even take it off the pavement for that matter. This same truck is actually a statement for the trust in the build to take it on 1,000-mile trips with over 1,000 horsepower.

During our trek down to the Florida panhandle, en route to Diesel Thunder Spring Break, we obviously expected to see a ton of really nice trucks. Upon our arrival, we didn’t expect to see something with Wyoming license plates. Levi Krech drove his truck from Wyoming all the way to Florida for an event. If that doesn’t scream trustworthy parts, then what does?


Levi Krech owns his own business, Unique Performance, LLC, and relies on his business to fund his nationwide road trips to these truck event across the country. Krech has built a social media empire through trucks and with the recent release of Tron, it's continuing to rapidly grow. As you can see, Krech is one to give credit where credit is due by showcasing all of the companies that have helped get this build where it is now.

Levi “Whitesnake” Krech has always had a thing for having nasty clean trucks, but in our eyes, this one takes the cake. Krech’s 2013 Dodge Ram Longhorn 3500, named “Tron SRT” is such a clean build that it’s almost unbelievable. “I built this truck to be different,” said Krech. “The fact that it was this bright red and a Longhorn, I knew this was the one.”

This truck is uber-clean, but it needs to perform in virtually every driving situation. “I love taking these nationwide road trips,” Krech said. “The fact that this build can drive long trips and have nasty horsepower in a matter of seconds is the best part about it.” Krech relies on Tron to work during racing, road trips, and even towing his snowmobiles and trailer.

Even towing a snowmobile and trailer through -20 degree’s Fahrenheit Wyoming temperatures, Krech still obtains 20 miles per gallon. For something that could take on most muscle cars, that’s an incredibly good fuel mileage.

This build took only four months, but Krech still stressed that there was no rushing this build. “I wanted to take my time on this build,” he said. “When you rush through a build like this, you will make mistakes, and that wasn’t a part of the plan.” Tron rides on a set of 22×12 Fuel Off-RoadMOAB wheels and they’re wrapped in 305/40R22 Toyo Proxes tires.

Although Krech’s interior was packed full from the road trip, what we can tell you is that the interior is an incredible cattle tan leather with matching interior pieces. Krech stressed that the outside was the important part anyway.

Getting the truck to this level of brightness was with the help of Knockout Customs. They paint matched all of the pieces that would normally come in chrome including the bumpers and grille. Team Unique did the works on the headlights and tail lights and tinted them out, offering a murdered look. Krech sends thanks to Cameron Guersey and Stephen Couch on the paintwork. “I’ve always wanted an everyday driver that is capable of 1,000 horsepower,” said Krech. “After many hours, I finally have my rig.”

What engine can you build that will make 1,000 plus horsepower, get excellent fuel mileage, and go on extremely long trips? Krech went to the engine experts over at Freedom Racing Engines for Tron’s powerplant and told them what he wanted. The guys at Freedom offered the FRE Street Stage 2 Cummins engine. This Cummins is punched out to a 6.8-liter displacement.


From the snowy roads of Wyoming to the sandy beaches of the Emerald Coast, Tron can do it all. Beachgoers were gawking at the truck as we took pictures on the beach. The engine is bored .20 over, houses a balanced crankshaft, and uses ARP main cap studs. When you’re making anything north of 900 horsepower, you’re thinking about connecting rods. A lot of times they are the weak link, but luckily for Krech, Freedom uses a performance rod. Strapped to the CP Carrillo HD billet rods are a set of QSB pistons, and just north of those rests a Hamilton Cams camshaft with 178 lift and 208 duration.

Krech uses a combination of QA1 adjustable coilover shocks and Flight Fabrications ladder bars to sustain traction and prevent axle wrap when planting this 1,000 horsepower to the ground.

The cylinder head has been ported and polished and is filled with Manley intake and exhaust valves; also, Fleece Performance Engineering 7/16-inch pushrods, billet rocker bridges, 110-pound valve springs, and ARP rocker studs. On the fueling side of things, Tron has a Fleece Performance Engineering dual CP3 kit that feeds the injectors. Krech trusts a set of S & S Diesel Motorsports150-percent-over-stock fuel injectors to build enough heat to help spool his air setup.

Resting on a pretty black Steed Speed exhaust manifold is a Fleece single billet S475 measuring out to 75/87/.90.

Hanging off the back of the 6.8-liter creation is a 47RE. These trucks obviously came with the 68RFE transmission, but Krech didn’t want to take any chances on having issues. So, he turned to Brian Parker, at IKT Diesel Performance, to build up the Whitesnake special. In this 47RE, he has some of the best parts in the industry offered, and it results in something that is always ready for battle.

In this 47RE transmission are all billet parts from SunCoast Diesel Transmissions including a billet drum and band, a 27-spline input, 29-spline output, and billet intermediate shafts. Manually controlling the 47RE is the SunCoast Diesel PCS 2800. With this PCS, Krech can control when the transmission shifts, how the transmission shifts, and so much more. Slipping over the output shaft is a SunCoast Diesel Triple Disc torque converter that is set with a 2,000 RPM stall.


This bright red longhorn paint mixed with the custom tinting job from Krech's unique performance makes for one clean ride.

We asked Krech if there was anything on this build he would change, and he said, “nothing at all.” Krech took a lot of time to think this out and make sure everything was done right the first time.

“As for the future of Tron, I want to make more than 1,100 horsepower,” said Krech. “Tron is rolling proof that you can build a do-it-all-type build and still have it be reliable.” Krech sends out his biggest thanks to Chase Fleece and the entire crew at Fleece Performance And Engineering, Freedom Racing Engines, Ron Woolverton of SunCoast Diesel Transmissions, and Ben Shadday at Done Right Diesel Performance.

After seeing this truck in person, it is clear that Krech is passionate about trucks and it shows no sign of slowing down. We are ecstatic to see where this truck ends up in the future and hope to see it progress even more. Who knows, maybe one day we could see this truck in the Ultimate Callout Challenge one day?